Anjielo Wifi Halow graphics integrated transmission module UAV robot graphics transmission module supports external power amplifier

WiFi HaLow integrated transmission module

for data transmission

Please select the appropriate voltage when purchasing. A 5-12V network bridge can be used with power supplies in the 5-12V range. 24V/36V/48V are industrial-grade fixed voltages; please ensure that the appropriate power supply equipment is used according to the specified voltage.

AH38 Template Operation Instructions

Operation Guide：
1. Attach one end of the IPEX to SMA cable to the IPEX and connect the other end to the antenna.
2. Turn the mode switch of one module to the AP (receive) position and the mode switch of the other module to the STA (transmit) position.
3. After the module is powered on, the five working indicators will flash. After the self-test is completed, the red power indicator and the first indicator on the left of the module in the AP state will be on, and only the red power indicator of the module in the STA state will be on.
4. Press the pairing button at the same time. At this time, the signal indicators of the AP module and the STA module will flash, indicating that the pairing is successful. Release the pairing button, the signal indicators of the two modules will be on, and the modules can be used normally.

Product Description
• Based on IEEE802.11ah (Halow) protocol
• Data throughput 16Mbps
• 1km transmission distance throughput greater than 1Mbps
• Supports multiple interfaces: SDIO/USB/serial port/network port
• Has super diffraction capability
• Applicable to: wireless suits; baby monitor video surveillance; drones;
Robot industrial control; Internet of Things; smart wearables